Benefits of using compact laminates

With the increasing use of custom cabin work, there needs to be a laminate that can still deliver same value even in less space. Thank to compact grade laminate that deliver same level of usefulness even in compact spaces. Compact laminates are widely used by attaching them to plywood of particular board counter tops. A large number of cabinets are manufactured in cabinet factories nowadays. However there may be sometimes a compact grade laminate must be installed at the new building site for several reasons. With the increasing demand for custom cabinet work, the demand for compact laminates and textured laminate are increasing day by day.

When it comes to make the comparison between the pre built and custom built cabinets, there comes no solid conclusion. With the rising need of reliable quality, a large number of high end housing builders now is opting for compact laminates. In the same time it is feasible to compare the prices of both the options.

Countertops are usually covered with a 1/16th laminate, any segments would generally be covered with a 1/32nd compact grade laminate. However, there are numerous manufacturers that provide a great range of compact laminates that vary in sizes, patterns and styles.

The surface which needs to be laminated needs to be precisely clean. Based on the instructions given by the compact grade laminate manufacturers, the surface should be thoroughly wiped down with a thinner or mineral spirits and then allowed to get dry. After this laminate is then cut to size. Usually it is cut about a half an inch larger than the area to be covered. In case of a seam, the adjoining edges must be precisely straight. Generally you can do a slight undercut to ensure a perfect fit. You can make the use of a sanding block to do this. In most cases laminated and glues require at least a room temperature of 70 degrees Fahrenheit.

The most commonly used adhesive is contact cement. You can also look at other products available in the market as well. One major thing to keep in mind while dealing with adhesive laminates is to ensure proper ventilation. This is due to the high inflammable property of contact cement

During the process the edges are first covered and you would want to put the edges on first so that when the top laminate is on it will overcome so there is no seam or joint to be seen. It is recommended to apply the adhesive to the back of both, the countertop edge and the piece of laminate going around the edge. The proper way to trim the composite laminate is to use a router, or other tool particularly for this purpose. After the trimming is done, it needs to be smoothened carefully with sandpaper.

Greenlam is an environmentally responsible company that takes the role of a leader in the laminate industry. We believe in meeting and exceeding our clients’ expectations by miles. Visit us at http://www.greenlam.co.uk/ for more information about textured laminate and our other products.